Datalogger
WSD12-4D - Wireless Smart Datalogger
4 channels Wireless Smart Datalogger - Temperature (environment or surface: selectable by jumper) or potentiometric sensor input and 3 potentiometric sensor (selectable stroke) inputs - To be used with or equivalent accessories -Type “C” internal lithium battery for a battery life up to 10 years with samples every 60 minutes - IP65 sealing.
€ 556,60
VAT and shipping excluded
Contact us
- Technical data
- Downloads
- Related products
- Case Studies
| Power supply | 8.5A/h - 3.6V type “C” lithium internal battery |
| Battery life (*) | Up to 10 years (samples every 60 minutes and radio signal quality at least sufficient) |
| Measures acquired ( 4 input channels |
|
| Sampling interval (*) | Selectable from one minute to 24 hours ( 10 minutes default) |
| Datalogger capacity | 64,000 samples (for each channel) |
| Working temperature |
|
| Radio frequency | ISM 868MHz |
| Radio coverage | Up to 6Km in line of sight(can be extended using WR12 battery powered routers) |
| Sealing | IP65 |
| Dimensions | 90 x 160 x 50mm |
| Weight | 450g |
| Case material | ABS |
| Mounting | 4 points |
| Connections | Wireless/USB |
| Cable external diameter | 4mm minimum - 8mm maximum |
| Copper wire section | 0.05 ÷ 2.5mm² / ÷ 14 AWG |
| Temperature - Transducer type | NTC10KΩ |
| Temperature - Measure range | -30°C ÷ +60°C |
| Temperature - Measure accuracy |
|
| Temperature - Measure resolution | 0.01°C |
| Proportional measure - Transducer type | Potentiometer |
| Proportional measure - Measure range | 0 ÷ 100% |
| Proportional measure - Measure resolution | 0.01% |
| Linear deformation - Transducer type | Potentiometer |
| Linear deformation - Measure range | Configurable using WineCapManager - From 1mm up to 1,000mm |
| Linear deformation - Measure accuracy | 0.1% analog input - Refer to potentiometer’s technical sheet |
| Linear deformation - Measure resolution | 12bit |
* battery life may be influenced by fieldwork conditions, sampling interval and system configuration.
** radio coverage reachable using up to 32 WR12 routers (maximum 16 for each path) between the device and the basestation.
- PZ12-A-050 - Rectilinear displacement transducer
- GSF - Linear wire position transducer
- PY2-C-010 - Rectilinear displacement transducer with ball tip
- PY2-C-025 - Rectilinear displacement transducer with ball tip
- PY2-C-050 - Rectilinear displacement transducer with ball tip
- PY2-F-025 - Rectilinear displacement transducer with ball tip
- PY2-F-050 - Rectilinear displacement transducer with ball tip
- PY2-F-050IP65 - Rectilinear displacement transducer with ball tip
- PY2-F-100 - Rectilinear displacement transducer with ball tip
- PZ12-A-010 - Rectilinear displacement transducer with cylindrical case