Datalogger
WLRD12-VW - Wireless Smart Datalogger
WineCap™ LoRa® 4-channel Data Logger - Up to 4 inputs for vibrating wire transducers and up to 2 temperature transducers. - Configurable inputs 2+2, 3+1, 4+0 - Type ‘C’ lithium battery for up to 4 years of autonomy with 4 vibrating wires and sampling every 60 minutes - IP65.
€ 871,20
VAT and shipping excluded
Contact us
- Technical data
- Downloads
- Related products
| Power supply | 8.5Ah - 3.6V type “C” lithium internal battery (BAT4) |
| Battery life (*) | Up to 4years (samples every 60 minutes and radio signal quality at least sufficient) |
| Measures acquired (4 input channels) | · Frequency · Temperature |
| Sampling interval (*) | Selectable from one minute to 24 hours ( 60 minutes default) |
| Datalogger capacity | 64,000 samples (for each channel) |
| Working temperature | · Operative: -30°C ÷ +60°C · Warehousing: -40°C ÷ +70°C |
| Radio frequency | ISM 868MHz |
| Radio coverage | Up to 15Km in line of sight(can be extended using WLRE) battery powered repeaters) |
| Sealing | IP65 |
| Dimensions | 90x160x50mm |
| Weight | 450g |
| Case material | ABS |
| Mounting | Fix on 4 points |
| Connections | Wireless, USB |
| Cable external diameter | 4.7mm maximum |
| Copper wire section | 0.05 ÷ 2.5mm² / ÷ 14 AWG |
| Frequency - Transducer type | Vibrating Wire |
| Frequency - Measure range | 400÷5,000Hz |
| Frequency - Measure accuracy | ±50ppm |
| Frequency - Measure resolution | 0,1Hz |
| Temperature - Transducer type | NTC3KΩ |
| Temperature - Measure range | -20°C÷+70°C |
| Temperature - Measure accuracy | 0.25°C a 25°C |
| Temperature - Measure resolution | 0.01°C |
| 2VW-2NTC configuration (Default) (***) | Two frequencies and two temperatures |
| 3VW-1NTC configuration (***) | Three frequencies and one temperature |
| 4VW configuration (***) | Four frequencies |
* battery life may be influenced by fieldwork conditions, sampling/measuring interval and system configuration.
** radio coverage can be extended using up to 32 enhancers WLRE (maximum 16 for each path) between the device and the gateway.
*** refer to the documentation of the selected transducers. Configuration via WineCapManager 5_4_0 (or later) management software.
