Datalogger
WSD10DGII - Internal wire linear deformation - Peak acceleration - Biaxial incline
4-channel Wireless Smart Datalogger - Internal wire linear deformation - Peak acceleration, biaxial incline - Powered by onboard photovoltaic panel - Internal safety battery for a virtual unlimited life - IP67.
€ 1.439,90
TVA et frais de port exclus
Nous contacter
Power supply | Photovoltaic panel with backup battery support (3.6A/h - 3.6V type “A” lithium battery) |
Battery life (*) | Unlimited (samples every 30 minutes and radio signal quality at least sufficient) |
Measures acquired ( 4 input channels) | · Peak acceleration · Biaxial incline of roll and pitch · Wire linear deformation |
Sampling interval (*) | Selectable from one minute to 24 hours ( 60 minutes default) |
Datalogger capacity | 64,000 samples (for each channel) |
Working temperature | · Operative: -30°C÷+60°C · Warehousing: -40°C÷+70°C |
Radio frequency | ISM 868MHz |
Radio coverage | Up to 6Km in line of sight (can be extended using WR12 battery powered repeaters) |
Sealing | IP67 |
Dimensions | 78x78x81.4mm |
Weight | 750g |
Case material | PBT |
Rope material | AISI316 stainless steel covered by nylon Ø 0,85mm |
Deformation – Transducer type | Potentiometer |
Deformation – Potentiometer linearity | ±0.5% FS |
Deformation – Potentiometer repeatability | ±0.1% FS |
Linear deformation – Measure range | 0÷4,800mm |
Linear deformation – Measure resolution | 1mm |
Linear deformation – Alarms | Single or bidirectional threshold configurable |
Acceleration - Transducer type | Three axis accelerometer - MEMS Technology |
Acceleration - Measure range | ±16g |
Acceleration - Measure resolution | 100mg |
Acceleration - Alarms | Threshold common on three axis configurable |
Incline - Transducer type | Three axis accelerometer - MEMS Technology |
Incline - Measure range | ±90° |
Incline - Measure accuracy | ±1° |
Incline - Measure resolution | 0.1° |
Incline - Alarms | Configurable |
Potentiometer - Life cycles | 250,000 |
* battery life may be influenced by fieldwork conditions, sampling/measuring interval and system configuration.
** radio coverage can be extended using up to 32 WR12 repeaters (maximum 16 for each path) between the device and the gateway.