WSD00LP - Light intensity - Physical presence
Two channels Wireless Smart Datalogger - Light intensity and physical presence - Type "AA" internal lithium battery for a battery life up to 5 years with samples every 10 minutes.
|Power supply||2.4A/h - 3.6V type “AA” lithium internal battery|
|Battery life (*)||Up to 5 years (samples every 10 minutes and radio signal quality at least sufficient)|
|Measures acquired (2 channels)||· Light intensity
· Presence in area
|Sampling interval (*)||Selectable from one minute to 24 hours (10 minutes default)|
|Datalogger capacity||128,000 samples (for each channel)|
|Working temperature||· Operative: -30°C ÷ +60°C
· Warehousing: -40°C ÷ +70°C
|Radio frequency||ISM 868MHz|
|Radio coverage (**)||Up to 6Km in line of sight (can be extended using WR12 battery powered repeaters)|
|Dimensions||80 x 80 x 25mm|
|Mounting||Fix on 2/4 points|
|Light intensity - Transducer type||Photodiode array|
|Light intensity - Measure range||0 ÷ 16KLux|
|Light intensity - Measure resolution||1Lux|
|Presence in area - Transducer type||PIR|
|Presence in area - Measure range||360° coverage - 102° horizontal angle / 92° vertical angle|
|Presence in area - Coverage||12 meters, circular|
|Presence in area - Temperature difference needed for detection||≥4°C between target and environment|
|Linear deformation - Measure range (**)||25/50/100 mm|
* battery life may be influenced by fieldwork conditions, sampling interval and system configuration.
** radio coverage reachable using up to 32 WR12 routers (maximum 16 for each path) between the device and the gateway.