WSD12-4D - Potentiometric sensor input - Temperature

4-channel Wireless Smart Datalogger - 3 potentiometric sensor inputs (selectable stroke) and temperature (environment/contact) or additional potentiometric input - Type “C” internal lithium battery for a battery life up to 10 years with samples every 60 minutes - IP65.

€ 665,50 TVA et frais de port exclus
Nous contacter
  • Données techniques
  • Téléchargements
  • Produits connexes
  • Cas d'étude
Power supply 8.5Ah - 3.6V type “C” lithium internal battery (BAT2)
Battery life (*) Up to 10 years (samples every 60 minutes and radio signal quality at least sufficient)
Measures acquired (4 input channels) · Linear deformation· Proportional measure· Temperature
Sampling interval (*) Selectable from one minute to 24 hours (60 minutes default)
Datalogger capacity 64,000 samples (for each channel)
Working temperature · Operative: -30°C ÷ +60°C
· Warehousing: -40°C ÷ +70°C
Radio frequency ISM 868MHz
Radio coverage Up to 6Km in line of sight (can be extended using WR12 battery powered repeaters)
Sealing IP65
Dimensions 90x160x50mm
Weight 450g
Case material ABS
Mounting Fix on 4 points
Connections Wireless, USB
Cable external diameter 4.7mm maximum
Copper wire section 0.05 ÷ 2.5mm² / ÷ 14 AWG
Temperature - Transducer type NTC10KΩ
Temperature - Measure range -30°C÷+60°C
Temperature - Measure accuracy · ±0.5°C Range -30°C÷0°C
· ±0.2°C Range 0°C÷+60°C
Temperature - Measure resolution 0.01°C
Proportional measure - Transducer type Potentiometer
Proportional measure - Measure range 0÷100%
Proportional measure - Measure resolution 0.01%
Linear deformation - Transducer type Potentiometer
Linear deformation - Measure range Configurable using WineCapManager - From 1mm up to 10,000mm
Linear deformation - Measure accuracy 0.1% analog input - Refer to potentiometer’s technical sheet
Linear deformation - Measure resolution 14bit

* battery life may be influenced by fieldwork conditions, sampling/measuring interval and system configuration.

** radio coverage can be extended using up to 32 WR12 repeaters (maximum 16 for each path) between the device and the gateway.

** refer to selected transducer’s documentation. Setup DIP switches in proper way.