Datalogger
WSD12-TF KIT - Thermo-flowmeter system
Thermo-flowmeter system consisting of 3 Wireless Smart Dataloggers - Indoor side: 1 thermometric datalogger for 3 transducers and 1 datalogger for thermoflowmetric plate - Outdoor side: 1 thermometric datalogger for 3 transducers - IP65 (PT1000FR transducers and plate included).
€ 3.109,70
TVA et frais de port exclus
Nous contacter
- Données techniques
- Téléchargements
- Produits connexes
WSD12T-TTT1K
| Power supply | 8.5Ah - 3.6V type “C” lithium internal battery |
| Battery life (*) | Up to 5years (samples every 10 minutes and radio signal quality at least sufficient) |
| Measures acquired ( 4 input channels) | · Indoor temperature· Surface temperature |
| Sampling interval (*) | Selectable from one minute to 24 hours ( 10 minutes default) |
| Datalogger capacity | 64,000 samples (for each channel) |
| Working temperature | · Operative: -30°C ÷ +60°C· Warehousing: -40°C ÷ +70°C |
| Radio frequency | ISM 868MHz |
| Radio coverage | Up to 6Km in line of sight(can be extended using WR12 battery powered repeaters) |
| Sealing | IP65 |
| Dimensions | 90x120x50mm |
| Weight | 350g |
| Case material | ABS |
| Mounting | Fix on 4 points |
| Connections | Wireless, USB |
| Cable external diameter | 2.5mm minimum - 6.5mm maximum |
| Copper wire section | 0.05÷2.5mm²/÷14AWG |
| Indoor temperature - Transducer type | NTC10KΩ |
| Indoor temperature - Measure range | -20°C÷+60° |
| Indoor temperature - Measure accuracy | ±0.2°C in whole range |
| Indoor temperature - Measure resolution | 0.01°C |
| Surface temperature - Transducer type | PT1000 |
| Surface temperature - Measure range | -30°C÷+50°C |
| Surface temperature - Measure accuracy | ± 0.25°C in whole range |
| Surface temperature - Measure resolution | 0.01°C |
WSD12T-FLUX
| Power supply | 8.5Ah - 3.6V type “C” lithium internal battery |
| Battery life (*) | Up to 5years (samples every 10 minutes and radio signal quality at least sufficient) |
| Measures acquired ( 4 input channels) | · Indoor temperature· Thermocouple pile |
| Sampling interval (*) | Selectable from one minute to 24 hours ( 10 minutes default) |
| Datalogger capacity | 64,000 samples (for each channel) |
| Working temperature | · Operative: -30°C ÷ +60°C· Warehousing: -40°C ÷ +70°C |
| Radio frequency | ISM 868MHz |
| Radio coverage | Up to 6Km in line of sight(can be extended using WR12 battery powered repeaters) |
| Sealing | IP65 |
| Dimensions | 90x120x50mm |
| Weight | 350g |
| Case material | ABS |
| Mounting | Fix on 4 points |
| Connections | Wireless USB |
| Cable external diameter | 2.5mm minimum - 6.5mm maximum |
| Copper wire section | 0.05÷2.5mm²/÷14AWG |
| Indoor temperature - Transducer type | NTC10KΩ |
| Indoor temperature - Measure range | -20°C÷+60° |
| Indoor temperature - Measure accuracy | ±0.2°C - Range 0°C÷+60° |
| Indoor temperature - Measure resolution | 0.01°C |
| Thermo-fluxmeter input - Transducer type | Thermo-pile fluxmeter plate |
| Thermo-fluxmeter input - Measure range | ±35W/m² |
| Thermo-fluxmeter input - Measure accuracy | 0.001W/m² |
| Thermo-fluxmeter input - Measure resolution | ±0.05W/m² |
* battery life may be influenced by fieldwork conditions, sampling/measuring interval and system configuration.
** radio coverage can be extended using up to 32 WR12 repeaters (maximum 16 for each path) between the device and the gateway.
