Datalogger
WSD12PS-4AIMx - Wireless Smart Datalogger
4 channels Wireless Smart Datalogger - 4 configurable voltage (0÷5Vdc, 0÷10Vdc, 0÷25Vdc) or current (0÷25mA) inputs with 12 or 24Vdc up to 100mA power supply for external transducers (piezometers, level cups, clinometers, etc) - Samples in percentage on full scale value - 2 type "C" lithium internal batteries for a battery life of 3 years with samples every 60 minutes - IP65 sealing with PG9 instead PG7 and Gore-Tex valve to compensate atmospheric pressure.
- Données techniques
- Téléchargements
- Produits connexes
ower supply | Dual 5,8A/h - 3,6 V type “C” lithium internal battery |
Battery life (*) | Up to 3 years(samples every 60 minutes, with 100mA of 12V power load and radio signal quality at least sufficient) |
Power supply generated for transducers | +12Vdc or +24Vdc (up to 100mA) - (Selectable onboard using jumpers) |
Sampling interval (*) | Selectable from one minute to 24 hours (60 minutes default) |
Datalogger capacity | 64,000 samples |
Working temperature | · Operative: -30°C ÷ +60°C · Warehousing: -40°C ÷ +70°C |
Radio frequency | ISM 868MHz |
Radio coverage (**) | Up to 6Km in line of sight(can be extended using WR12 battery powered routers) |
Sealing | IP65 |
Dimensions | 90 x 160 x 50mm |
Weight | 450g |
Case material | ABS |
Mounting | Fix on 4 points |
Connections | Wireless/USB |
Cable external diameter | 3mm minimum - 6.5mm maximum |
Copper wire section | 0.05 ÷ 2.5mm² / ÷ 14 AWG |
Measures acquired (4 channels) - Possible Input Signals (up to 4) | · 0÷5V, 0÷10V · 0÷25Vdc, 0÷25mA |
Measures acquired (4 channels) - Resolution | 12 bits converter |
Measures acquired (4 channels) - Measurement Expression | Expressed as full scale % setting |
Measures acquired (4 channels) - Transducers Connection | Through 5mm pitch screw terminal blocks |
Measures acquired (4 channels) - Settings (measure/system of measure) |
Using jumpers (***) |
* battery life may be influenced by fieldwork conditions, sampling/measuring interval and system configuration.
** refer to selected transducer’s documentation. Setup DIP switches in proper way.
** radio coverage reachable using up to 32 WR12 routers (maximum 16 for each path) between the device and the basestation.